Lompat ke konten Lompat ke sidebar Lompat ke footer

Lowongan Kerja Banyak Posisi PT Tereos FKS Indonesia Penempatan Cilegon

Tereos FKS Indonesia merupakan pelopor industri pengolahan jagung terpadu di Indonesia yang didirikan pada tahun 2014 untuk menjawab tingginya permintaan pasar atas pati jagung dan pemanis di Asia Tenggara. Perusahaan ini merupakan gabungan entitas antara Tereos Group dengan FKS Group yang mendapatkan total tambahan modal investasi sebesar 100 juta USD di tahun 2017.

Lowongan Kerja Banyak Posisi PT Tereos FKS Indonesia Penempatan Cilegon

Berlokasi di pelabuhan Cigading - pelabuhan niaga di bagian barat Pulau Jawa - kami memiliki fasilitas yang terintegrasi untuk memproduksi beragam produk turunan pati jagung. Saat ini, total kapasitas kami mencapai 1.000 ton jagung setiap harinya dan akan terus meningkat hingga 30% atau 1.300 ton di akhir tahun 2018.


Kami memproses pipil jagung ke dalam rangkaian produk berkualitas untuk bahan baku di berbagai sektor, seperti makanan & minuman, pakan hewan, tekstil, perekat, serta sektor lainnya. Lewat produk yang dihasilkan serta lapangan pekerjaan yang kami ciptakan, Tereos FKS Indonesia juga turut berkontribusi dalam mengembangkan industri lokal. Kini, Tereos FKS Indonesia telah menciptakan 500 lapangan pekerjaan dengan 99% di antaranya diisi oleh SDM lokal.


PT. Tereos FKS Indonesia saat ini sedang membuka lowongan kerja untuk mengisi posisi sebagai :


1. Electrical Instrument Lead

Job Description :

  • Supervise, manage technician and coordinate planning for Electrical tool reliability programs and problem solving in utility area including steam turbine generator, coal fired - FB boiler, air compressor, water treatment, and wastewater treatment system.
  • Ensure 'first job – right done' so that equipment reliability is maximized.
  • Having a role in close collaboration with other function in utility area to aim a reliable electrical equipment
  • Perform reliability analysis and continuous improvement to eliminate electrical, instrumentation and control system losses.
  • Respect the compliance on safety, health, environment, as well as prevention of product safety & quality defect.


Requirements :

  • Previous equivalent 8 years experiences as E/I supervisor in power plant or chemical plant.
  • Able to demonstrate and familiar with track record of power plant/boiler processes and system implementation.
  • Relevant minimum technical school degree (D3/S1 is preferred).
  • Experienced in the implementation of best practices on all scopes of electrical maintenance - trouble shooting, preventive & predictive maintenance, specifically in steam turbine generator, coal fired - FB boiler, air compressor, water treatment, and wastewater treatment facilities for min. 5 years.
  • Having knowledge of MV-LV CB, relay protection, electric motor (include hoist crane), variable drives, UPS and batteries, emergency genset, field instrumentation, control valve, process analytic instrumentation, MCC and Transformer, cable standard and sizing.
  • Has capability to develop schematic drawing and P&ID to perform fault diagnostics to identify and correct E/I failure and system failures.
  • Having knowledge of equipment control valve, pressure transmitter, flow meter, temperature transmitter, level transmitter, oxygen analyzer, DCS, and single loop controller.
  • Capability to operate electrical / instrument testing and calibration tools.
  • Experienced with CMMS.
  • Experienced with root cause analysis tools like cause mapping, why-why analysis, DMAIC.
  • Experienced with TPM concept and lean manufacturing.
  • Familiar with life safety standard procedure: LOTO, Line breaking, CSE, Hot work.
  • Having certificate “K3 Listrik” is an advantage
  • Familiar with Ms. Office and computer operation.
  • Fluent in technical English.
  • Good communication skills.
  • Able to work in minimum supervision.


2. Electrical Instrument Technician


Job Description :

  • Perform work related to the installation, maintenance, inspection, and testing variety of electrical & instrumentation equipment, including but not limited to electric motors, MV – LV switchgear, steam generator system, transformer, relay protection, electrical accessories, instrumentation, pneumatic system, and DCS/PLC control system.
  • Ensure 'first job – right done' so that equipment reliability is maximized.
  • Having a role in close collaboration with other function in utility area to aim a reliable electrical equipment.
  • Perform reliability analysis and continuous improvement to eliminate electrical, instrumentation and control system losses.
  • Ensure all the equipment and installation meet the regulation.
  • Respect the compliance on safety, health, environment, as well as prevention on product safety & quality.


Requirements :

  • Previous equivalent 3 – 6 years experiences as Electric/Instrument technician in power plant or wastewater treatment plant.
  • Able to demonstrate and familiar with track record of power plant/boiler processes and system implementation.
  • Minimum technical high school degree (STM/SMK).
  • Experienced in the implementation of electrical maintenance - trouble shooting, preventive & predictive maintenance, specifically in steam turbine generator, coal fired - FB boiler, air compressor, water treatment and wastewater facilities; min. 3 years.
  • Able to apply electrical and electronic theory & practice to electrical and instrumentation equipment.
  • Having knowledge of equipment of electric motors, MV-LV circuit breaker, relay protection, MCC, variable drives, hoist crane, UPS and batteries system, electronic parts.
  • Having knowledge of equipment control valve, pressure transmitter, flow meter, temperature transmitter, level transmitter, oxygen analyzer, DCS, and single loop controller.
  • Knowing the materials, methods, and equipment used in the inspection, testing, calibration, maintenance, and repair of process instrumentation and control equipment.
  • Able to read electrical, pneumatic drawing and P&ID to perform fault diagnostics to identify and correct electrical, pneumatic, and electric analogue failures, perform functional tests to identify and correct system failures.
  • Capable to operate electrical inspection and testing tools.
  • Familiar with air compressor, DCS deltaV, UPS and emergency genset.
  • Familiar with Ms. Office and computer operation.
  • Basic level in technical English.
  • Able to work in shift.


3. Mechanical Lead


Job Description :

  • Supervise, manage technician and coordinate planning for Mechanical tool reliability programs and problem solving in utility area including steam turbine generator, coal fired - FB boiler, air compressor, water treatment, and wastewater treatment system.
  • Ensure 'first job – right done' so that equipment reliability is maximized.
  • Having a role in close collaboration with other function in utility area to aim a reliable electrical equipment.
  • Perform reliability analysis and continuous improvement to eliminate mechanical system losses.
  • Respect the compliance on safety, health, environment, as well as prevention on product safety & quality.


Requirements :

  • Previous equivalent 8 years experiences as mechanical supervisor in power plant or chemical plant.
  • Able to demonstrate and familiar with track record of power plant/boiler processes and system implementation.
  • Relevant minimum technical school degree (D3/S1 is preferred).
  • Experienced in the implementation of best practices on maintenance steam turbine generator, coal fired - FB boiler, air compressor, water treatment, and wastewater treatment facilities; min. 5 years.
  • Having knowledge of equipment screw & centrifugal compressor, fan, high pressure pump, screw and belt conveyor, ESP, Steam turbine generator and boiler.
  • Having knowledge in vibration analysis level 1 is preferred.
  • Familiar with vibration analyser tool is advantage.
  • Has capability to develop mechanical drawing, isometric, and P&ID to perform fault diagnostics to identify and correct mechanical failure and system failures
  • Good ability to handling mechanical inspection tools including thermography, vibration tools, dial-laser alignment tools and gauge.
  • Experienced with CMMS.
  • Experienced with root cause analysis tools like cause mapping, why-why analysis, DMAIC.
  • Experienced with TPM concept and lean manufacturing.
  • Familiar with life safety standard procedure: LOTO, Line breaking, CSE, Hot work.
  • Having certificate SIO forklift and rigging is an advantage.
  • Familiar with Ms. Office and computer operation.
  • Fluent in technical English.
  • Good communication skills.
  • Able to work in minimum supervision.


4. Mechanical Technician


Job Description :

  • Perform work related to the installation, maintenance, inspection, and testing variety of mechanical system equipment including, but not limited to piping, static, hydraulic and rotating equipment in power plant and its utility plant.
  • Ensure 'first job – right done' so that equipment reliability is maximized.
  • Having a role in close collaboration with other function in utility area to aim a reliable electrical equipment.
  • Perform reliability analysis and continuous improvement to eliminate electrical, instrumentation and control system losses.
  • Ensure all the equipment and installation meet the regulation.
  • Respect the compliance on safety, health, environment, as well as prevention on product safety & quality.


Requirements :

  • Previous equivalent 3 – 6 years experiences as mechanical technician in power plant or wastewater treatment plant.
  • Able to demonstrate and familiar with track record of power plant/boiler processes and system implementation.
  • Minimum technical high school degree (STM/SMK).
  • Experienced in the implementation of maintenance steam turbine generator, coal fired - FB boiler, air compressor, water treatment, and wastewater treatment facilities; min. 3 years.
  • Having knowledge of equipment screw & centrifugal compressor, fan, pump, screw and belt conveyor, ESP, and boiler.
  • Able to read mechanical drawing, isometric, and P&ID to perform fault diagnostics to identify and correct mechanical failure and system failures.
  • Capable to perform rotating machine alignment
  • Familiar with mechanical inspection tools including thermograph, dial gauge, and vibration gauge.
  • Good communication skills.
  • Preferred hold SMAW/GTAW certificate.
  • Familiar with Ms. Office and computer operation.
  • Basic level in technical English.
  • Able to work in shift.



5. Power Plant Instrument Technician


Job Description :

  • Perform work related to the installation, maintenance, inspection, and testing variety of electrical & instrumentation equipment, including but not limited to instrumentation, pneumatic system, DCS/PLC control system, electric motors, steam generator system, electrical accessories, MV – LV switchgear, transformer, and relay protection.
  • Ensure 'first job – right done' so that equipment reliability is maximized.
  • Having a role in close collaboration with other function in utility area to aim a reliable electrical equipment.
  • Perform reliability analysis and continuous improvement to eliminate electrical, instrumentation and control system losses.
  • Ensure all the equipment and installation meet the regulation.
  • Respect the compliance on safety, health, environment, as well as prevention on product safety & quality.


Requirements :

  • Previous equivalent 3 – 6 years experiences as Instrument technician in power plant or chemical plant.
  • Able to demonstrate and familiar with track record of power plant/boiler processes and system implementation.
  • Minimum Diploma 3 Technical/Engineering School (D3 Engineering).
  • Experienced in the implementation of instrumentation maintenance - trouble shooting, preventive & predictive maintenance,
  • specifically in steam turbine generator, coal fired - FB boiler, air compressor; min. 3 years.
  • Able to apply electrical and electronic theory and practice as applied to instrumentation equipment.
  • Having knowledge of equipment control valve, pressure transmitter, flow meter, temperature transmitter, level transmitter, oxygen analyzer, DCS, single loop controller, electric motors, MCC, and variable drives.
  • Knowing the materials, methods, and equipment used in the inspection, testing, calibration, maintenance, and repair of process instrumentation and control equipment.
  • Able to read electrical, pneumatic drawing and P&ID to perform fault diagnostics to identify and correct electrical, pneumatic, and electric analogue failures, perform functional tests to identify and correct system failures.
  • Capable to operate electrical inspection and testing tools.
  • Preferably familiar with MV-LV switchgear system.
  • Familiar with air compressor, DCS deltaV, UPS and emergency genset.
  • Familiar with Ms. Office and computer operation.
  • Basic level in technical English.
  • Able to work in shift.



Jika anda tertarik dengan lowongan kerja tersebut silahkan melamar melalui link yang tersedia di bawah ini.


 - Electrical Instrument Lead

 - Electrical Instrument Technician

 - Mechanical Lead

 - Mechanical Technician

 - Power Plant Instrument Technician
Selamat Berjuang, semoga di mudahkan dalam ikhtiar mencari kerjanya